2.5mm进口MWA镍铁Ni55特殊设计铸铁焊条Mac Cast E407S
2.5mm进口MWA镍铁Ni55特殊设计铸铁焊条Mac Cast E407S
产品价格:¥27(人民币)
  • 规格:A5.15 ENiFe-CI HR
  • 发货地:天津
  • 品牌:
  • 最小起订量:1根
  • 诚信商家
    会员级别:钻石会员
    认证类型:企业认证
    企业证件:通过认证

    商铺名称:天津麦格纳焊接技术有限公司

    联系人:(先生)

    联系手机:

    固定电话:

    企业邮箱:mgn_welding@hotmail.com

    联系地址:天津市河西区龙海公寓20号楼69门605-607

    邮编:300202

    联系我时,请说是在线缆网上看到的,谢谢!

    商品详情

      英国进口MWA铸铁焊条Mac Cast E407?S|ENiFe-CI?HR|铸铁和钢焊接

      Manufactured on a pure nickel core wire with an extruded basic flux containing both graphite and a high metallurgical grade of iron powder. Welds with a soft stable arc and ensures a metal recovery of 160% with respect to core wire. Designed for welding all grades of cast iron to steel. The advanced deoxidisation system ensures the maximum combination of weld strength, ductility and machinability. The design principle of the electrode prevents overheating and provides great resistance to porosity.

      Mac Cast E407S铸铁焊条采用纯镍焊芯及含有石墨和高冶金级铁粉的挤压碱性焊剂。软稳定电弧焊接,相对于焊芯的金属回收率为160%。设计用于将所有等级的铸铁焊接到钢上。先进的脱氧系统确保了焊缝强度、延展性和可加工性的最大结合。焊条的设计原理防止了过热,并提供了极大的抗气孔性能。

      ?

      Typical All Weld Metal Chemical Analysis (%)

      典型全焊缝金属成分(%)

      C

      Fe

      Mn

      Ni

      P

      S

      Si

      0.90

      44.0

      1.10

      54.0

      0.009

      0.010

      0.60

      ?

      ?

      Typical All Weld Metal Mechanical Properties(As Welded

      典型全焊缝金属机械性能(焊态):

      Tensile Strength抗拉强度: ??????????410 N/mm2

      0.2% Proof Stress屈服强度: ?????????230 N/mm2

      Elongation延伸率: ???????????????????15%

      Hardness硬度: ?????????????????????240 HV

      ?

      Sizes Available and Recommended Amperages

      尺寸Φ/电流:

      2.5mm

      3.2mm

      4.0mm

      5.0mm

      70-100A

      100-130A

      140-190A

      180-220A

      ?

      Current电流:AC/DC?(+/-)

      ?

      Related Specification参考标准:AWS A5.15 ENiFe-CI HR

      ?

      Storage储存:Electrodes should be stored in dry conditions. Should the electrodes ?become damp, re-dry for one hour at 150°C?before use. 焊条应储存在干燥环境中。如果焊条受潮,应在150°C下重新干燥1小时后再使用。?

    在线询盘/留言
  • 0571-87774297